Studiove kamery

Arca Swiss

F-line 6 x 9 cm

TILTS: Front(base): 30 degrees forward, 30 degrees backward, Rear(base): 30 degrees forward, 30 degrees backward SWINGS: Front: 45 degrees left, 45 degrees right, Rear: 45 degrees left, 45 degrees right (specs are for calibrations on camera, all F-line Arca cameras have 360 degree swing capability) RISE AND FALL: Front: 60mm rise, Rear: 60mm rise LATERAL SHIFT Front: 40mm left, 40mm right, Rear: 40mm left, 40mm right CAMERA BACK 6x9cm Vertical/Horizontal quick-change focusing screen
Optional #080002 Adapter required to attach Graflock type roll film holders
FOCUSING SCREEN Groundglass with grid-lines, 6x7 and 6x9 markings and fresnel screen INTERCHANGEABLE BELLOWS Yes MINIMUM EXTENSION: 2.15" (53mm) with standard bellows and flat lensboard, 1.5" (38mm) with 15mm recessed lensboard MAXIMUM EXTENSION: 200mm (maximum length of included bellows) MONORAIL LENGTH: Telescoping type 30-46cm LENSBOARD: 110 x 110mm Arca Swiss DIMENSIONS: 11.8 x 6.3 x 10" (30 x 16 x 25cm) L.W.H. WEIGHT: 5.5 lbs. (2.5kg)

Discovery 4 x 5 inch

TILTS: Front(base): 30 degrees forward, 30 degrees backward, Rear(base): 30 degrees forward, 30 degrees backward SWINGS: Front: 45 degrees left, 45 degrees right, Rear: 45 degrees left, 45 degrees right (specs are for calibrations on camera, all F-line Arca cameras have 360 degree swing capability) RISE AND FALL: Front: 3.9" (100mm) rise, Rear: 3.9" (100mm) rise LATERAL SHIFT Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK 4x5" Vertical/Horizontal quick-change International Standard Graflock NOTE: Arca-Swiss manufacture a special Arca-Polaroid 405 back for their 4x5" cameras - Polaroid's 405 back will not work! FOCUSING SCREEN Groundglass with grid-lines, 6x7, 6x9, 6x12 and Polaroid markings, and fresnel screen INTERCHANGEABLE BELLOWS Yes MINIMUM EXTENSION: 3.2" (80mm) with standard bellows and flat lensboard, 2.6" (65mm) with standard bellows and 13mm recessed lensboard, 2.2" (55mm) with wide-angle bellows and 13mm recessed lensboard MAXIMUM EXTENSION: 11.8" (limited by rail, up to 380mm (15") with optional rail extension) MONORAIL LENGTH: 11.8" (30cm) LENSBOARD: 171mm x 171mm FOLDED DIMENSIONS: 11.8 x 8.7 x 13" (30 x 22 x 33cm) L.W.H. WEIGHT: 6.2 lbs (2.9 kg)

M - line monolith 4 x 5 inch

TILTS: Front: (axis tilt) 30 degrees forward, 30 degrees backward + (base tilt) 45 degrees forward, 45 degrees backward, Rear: (base tilt only) 45 degrees forward, 45 degrees backward SWINGS: Front (geared): 45 degrees left, 45 degrees right, Rear (geared): 45 degrees left, 45 degrees right RISE & FALL: Front (geared): 2.75" (70mm) rise, Rear (geared): 2.75" (70mm) rise LATERAL SHIFT: Front (geared): 2" (50mm) left, 2" (50mm) right, Rear (geared): 2" (50mm) left, 2" (50mm) right, NOTE: Arca M models retain the manual side shift feature(center marking only) in addition to the geared shift - thus actual side shift is potentially much more! CAMERA BACK: 4x5 Vertical/Horizontal quick-change International Standard Graflock, NOTE: Arca-Swiss manufacture a special Arca-Polaroid 405 back for their 4x5" cameras - Polaroid's 405 back will not work! FOCUSING SCREEN: Groundglass w/ grid-lines, 6x7, 6x9, 6x12 and Polaroid markings and Fresnel INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.2" (80mm) with standard bellows and flat lensboard, 2.6" (65mm) with standard bellows and 13mm recessed lensboard, 2.2" (55mm) with wide-angle bellows and 13mm recessed lensboard MAXIMUM EXTENSION: 380mm (maximum length of included bellows) MONORAIL LENGTH: 15.7-25.6" (40-65cm) telescoping type LENSBOARD: 171 x 171mm DIMENSIONS: 16 x 9.8 x 14.5" (41 x 25 x 37cm) LWH WEIGHT: 12.3 lbs. (5.6kg)

F - line 4 x 5 inch

TILTS: Front(base): 30 degrees forward, 30 degrees backward, Rear(base): 30 degrees forward, 30 degrees backward SWINGS: Front: 45 degrees left, 45 degrees right, Rear: 45 degrees left, 45 degrees right (specs are for calibrations on camera, all F-line Arca cameras have 360 degrees swing capability) RISE AND FALL: Front: 3.9" (100mm) rise, Rear: 3.9" (100mm) rise LATERAL SHIFT: Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock NOTE: Arca-Swiss manufacture a special Arca-Polaroid 405 back for their 4x5" cameras - Polaroid's 405 back will not work! FOCUSING SCREEN: Groundglass with grid-lines, 6x7, 6x9, 6x12 and Polaroid markings, and fresnel screen INTERCHANGEABLE BELLOWS Yes MINIMUM EXTENSION: 3.2" (80mm) with standard bellows and flat lensboard, 2.6" (65mm) with standard bellows and 13mm recessed lensboard, 2.2" (55mm) with wide-angle bellows and 13mm recessed lensboard MAXIMUM EXTENSION: 380mm (maximum length of included bellows) MONORAIL LENGTH: Telescoping type 30-46cm LENSBOARD: 171mm x 171mm Arca Swiss FOLDED DIMENSIONS: 11.8 x 8.7 x 12.5" (30 x 22 x 32cm) WEIGHT: 7.6 lbs (3.5 kg)

F - line metric 4 x 5 inch

TILTS: Front(base): 30 degrees forward, 30 degrees backward, Rear(base): 30 degrees forward, 30 degrees backward SWINGS: Front: 45 degrees left, 45 degrees right, Rear: 45 degrees left, 45 degrees right (specs are for calibrations on camera, all F-line Arca cameras have 360 degree swing capability) RISE AND FALL: Front(geared): 3.9" (100mm) rise, Rear(geared): 3.9" (100mm) rise LATERAL SHIFT Front(geared): 1.2" (30mm) left, 1.2" (30mm) right, Rear(geared): 1.2" (30mm) left, 1.2" (30mm) right, NOTE: Arca Metric models retain the manual side shift feature(center marking only) in addition to the geared shift - thus actual side shift is 30mm(geared) plus 50mm! CAMERA BACK 4x5" Vertical/Horizontal quick-change International Standard Graflock, NOTE: Arca-Swiss manufacture a special Arca-Polaroid 405 back for their 4x5" cameras - Polaroid's 405 back will not work! FOCUSING SCREEN Groundglass with grid-lines, 6x7, 6x9, 6x12 and Polaroid markings, and fresnel screen INTERCHANGEABLE BELLOWS Yes MINIMUM EXTENSION: 3.2" (80mm) with standard bellows and flat lensboard, 2.6" (65mm) with standard bellows and 13mm recessed lensboard, 2.2" (55mm) with wide-angle bellows and 13mm recessed lensboard MAXIMUM EXTENSION: 380mm (maximum length of included bellows) MONORAIL LENGTH: Telescoping type 30-46cm LENSBOARD: 171mm x 171mm Arca Swiss DIMENSIONS: 11.8 x 8.2 x 13" (30 x 20 x 34cm) L.W.H. WEIGHT: 8 lbs (3.6 kg)

Cambo

45 N /4 x 5 inch/

•

Monorail Length: 16" (41cm)

•

Minimum Bellows Extension: 1 7/8" (4.8cm)

•

Maximum Bellows Extension: 14 1/2" (36.8cm)

•

Rise/Fall: 120mm

•

Lateral Shift: 50mm

•

Swings: +/-30 Degrees

•

Tilts: +/-30 Degrees

•

Type of Focusing: Friction

•

Type of Back: 360 Repositionable Graflock

•

Weight: 8 lbs. (3.6kg)

45 NX /4 x 5 inch/

•

Monorail Length: 21¼" (54cm)

•

Minimum Bellows Extension: 1 7/8" (4.8cm)

•

Maximum Bellows Extension: 19" (48cm)

•

Rise/Fall: 120mm

•

Lateral Shift: 50mm

•

Swings: +/-30 Degrees

•

Tilts: +/-30 Degrees

•

Type of Focusing: Friction

•

Type of Back: 360 Degree Revolving Graflock

•

Weight: 9.3 lbs. (4.2kg)

Explorer 4 x 5 inch

Specifications: Cadet Standard Cadet Wide Angle Front Rise/Fall: 60mm (2.36") 60mm (2.36") Front Lateral Shift: 60mm (2.36") 60mm (2.36") Front/Rear Swing: 60° w/zero detent 60° w/zero detent Front/Rear Tilt: 60° w/zero detent 60° w/zero detent Monorail Length: 450mm (17.7") 300mm (11.8") Bellows Type: Pleated Bag Maximum Bellows Extension: 390mm (15.2") 240mm (9.5") Minimum Bellows Extension: 60mm (2.4") 35mm (1.4") Useable Lens Focal Length Range: 75 – 305mm 47 – 150mm Lensboard Dimensions: 4.81 x 4.81" 4.81 x 4.81" Weight: 4.8 lbs. (2.2kg) 4.8 lbs. (2.2kg)

23 SF /6 x 9 cm/

45 SF /4 x 5 inch/

Legend 4 x 5 inch

Ultima 4 x 5 inch

Rail Length: 14" (36cm)
Bellows extension with Standard rail: 9.5" (240mm)
Front & Rear Swing: +/-30mm
Front & Rear Shift: +/-25mm
Front and Rear Rise: +/-20mm
Front and Rear Tilt: +/-20 Degrees
Weight: 11.25 lbs. (5.1kg)
Minimum focal length on Flat L/B: 47mm (With W/A Bellows)

Master PC 4 x 5 inch

•

Monorail Length: 10 x 16" (25 x 41cm) two-piece rail

•

Bellows Extension: 2 to 15" (5 to 38cm)

•

Rise/Fall: Geared 65mm

•

Lateral Shift: 70mm

•

Swings: +/-30°

•

Axial Tilts: +/-35°

•

Base Tilts: Manual

•

Type of Focusing: Geared Fine Focus 70mm

•

Type of Back: Reversible

•

Weight: 16 lbs. (7.25kg)

Horseman

LE 4 x 5 inch

TILTS: Front(axis): 360 degrees, Rear(axis): 360 degrees - limited only by the bellows SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by the bellows RISE & FALL: Front(geared): 1.2"(30mm) rise, 1.2"(30mm) fall, Rear(geared): 1.2"(30mm) rise, 1.2"(30mm) fall LATERAL SHIFT: Front(geared): 1.2"(30mm) left, 1.2"(30mm) right, Rear(geared): 1.2"(30mm) left, 1.2"(30mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with grid-lines and 6x7, 6x9 and 6x12cm markings INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 2.4" (60mm) with wide-angle bellows, 1.6" (40mm) with wide-angle bellows and 20mm recessed lensboard, 0.8" (20mm) with wide-angle bellows and 40mm recessed lensboard MAXIMUM EXTENSION: 15.7" (400mm) with standard bellows MONORAIL LENGTH: 15.7" (400mm) - optional monorails are available - Horseman does not offer extensions LENSBOARD: Horseman 140x140mm Flat or Recessed DIMENSIONS: 16.5 x 9.6 x 12.8" (420 x 245 x 325mm) LWH WEIGHT: 9.9 lbs. (4.5kg)

LB 4 x 5 inch

LX 4 x 5 inch

TILTS: Front: 360 degrees Axis tilt + Base Tilt 40 degrees forward/40 degrees backward, Rear: 360 degrees Axis + Base Tilt 40 degrees forward/40 degrees backward - Axis tilt limited only by the bellows SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by the bellows RISE & FALL: Front(geared): 1.2" (30mm) rise + 40mm(geared) Focus Plane Rise, 1.2" (30mm) fall, Rear(geared): 1.2" (30mm) rise + 40mm(geared) Focus Plane Rise, 1.2" (30mm) fall LATERAL SHIFT: Front(geared): 1.2" (30mm) left, 1.2" (30mm) right, Rear(geared): 1.2" (30mm) left, 1.2" (30mm) right CAMERA BACK: 4x5 Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with grid-lines, calibrated Variable Axis Tilt scale(0-40mm), 6x7, 6x9 and 6x12cm markings and fresnel INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 2.4" (60mm) with wide-angle bellows, 1.6" (40mm) with wide-angle bellows and 20mm recessed lensboard, 0.8" (20mm) with wide-angle bellows and 40mm recessed lensboard MAXIMUM EXTENSION: 20" (500mm) limited by included bellows MONORAIL LENGTH: Telescoping type - 18.1 to 27.5" (460 to 700mm) LENSBOARD: Horseman 140x140mm DIMENSIONS: 18.9 x 9.6 x 15" (480 x 245 x 380mm) LWH WEIGHT: 15 lbs. (6.9 kg)

LX - C 4 x 5 inch

TILTS: Front: 360 degrees Axis tilt + Base Tilt 40 degrees forward/40 degrees backward, Rear: 360 degrees Axis + Base Tilt 40 degrees forward/40 degrees backward - Axis tilt limited only by the bellows SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by the bellows RISE & FALL: Front(geared): 1.2" (30mm) rise + 40mm(geared) Focus Plane Rise, 1.2" (30mm) fall, Rear(geared): 1.2" (30mm) rise + 40mm(geared) Focus Plane Rise, 1.2" (30mm) fall LATERAL SHIFT: Front(geared): 1.2" (30mm) left, 1.2" (30mm) right, Rear(geared): 1.2" (30mm) left, 1.2" (30mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with grid-lines, calibrated Variable Axis Tilt scale(0-40mm), 6x7, 6x9 and 6x12cm markings and fresnel INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 2.4" (60mm) with wide-angle bellows, 1.6" (40mm) with wide-angle bellows and 20mm recessed lensboard, 0.8" (20mm) with wide-angle bellows and 40mm recessed lensboard MAXIMUM EXTENSION: 20" (500mm) limited by included bellows MONORAIL LENGTH: Telescoping type - 18.1 to 27.5" (460 to 700mm) LENSBOARD: Horseman 140x140mm Flat or Recessed DIMENSIONS: 18.9 x 9.6 x 15" (480 x 245 x 380mm) LWH WEIGHT: 15.6 lbs. (7.1 kg)

LX - C 8 x 10 inch

TILTS: Front: 360 degrees Axis tilt + Base Tilt 40 degrees forward/40 degrees backward, Rear: 360 degrees Axis + Base Tilt 40 degrees forward/40 degrees backward - Axis tilt limited only by the bellows SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by the bellows RISE & FALL: Front(geared): 1.2" (30mm) rise + 40mm(geared) Focus Plane Rise, 1.2" (30mm) fall, Rear(geared): 1.2" (30mm) rise, 1.2" (30mm) fall LATERAL SHIFT: Front(geared): 1.2" (30mm) left, 1.2" (30mm) right, Rear(geared): 1.2" (30mm) left, 2.4" (60mm) right CAMERA BACK: 5x7" Vertical/Horizontal quick-change International Standard FOCUSING SCREEN: Groundglass with grid-lines and calibrated Variable Axis Tilt scale(0-40mm) INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3" (75mm) using Wide-Angle Bellows MAXIMUM EXTENSION: MONORAIL LENGTH: Telescoping type - 18.1 to 27.5" (460 to 700mm) LENSBOARD: Horseman 140x140mm Flat or Recessed DIMENSIONS: 480 x 420 x 520mm LWH WEIGHT: 20.2 lbs. (9.2 kg)

Linhof

M 679 /6 x 9 cm/ s objektivem Rodenstock Apo Sironar S 180mm/5,6

TILTS: Front(axis): 20 degrees, + 30 degrees(base), Rear(axis): 20 degrees, + 30 degrees(base) SWINGS: Front: 30 degrees left, 30 degrees right, Rear: 30 degrees left, 30 degrees right RISE & FALL: Indirect - point camera and return standards to normal - no direct rise or fall LATERAL SHIFT: Indirect - point camera and return standards to normal - no direct rise or fall CAMERA BACK: Modular - Adapters available for Hasselblad, Mamiya RZ, RB, Horseman, Bronica GS and various digital backs FOCUSING SCREEN: Groundglass INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: MAXIMUM EXTENSION: MONORAIL LENGTH: Telescopes from 58-310mm LENSBOARD: Linhof M679 - specific to this model

M 679 cc /6 x 9 cm/ s objektivem Rodenstock Apo Sironar S 180 mm/5,6

Technikardan 23 s /6 x 9 cm/

TILTS: Front and Rear tilts limited only by bellows, with reference scales +/- 10 degrees with a "zero" position click-stop SWINGS: Front and Rear swings limited only by bellows, with reference scales +/- 10 degrees with a "zero" position click-stop RISE & FALL: Front: 50mm rise only, Rear: 50mm rise only LATERAL SHIFT: Front: 35mm right, 35mm left, Rear: 35mm right, 35mm left CAMERA BACK: 6x9cm (2x3") Vertical/Horizontal Linhof Technika 23 type, accepts standard 6x9 cut film holders, Linhof Super Rollex and Linhof Cine Rollex Roll film backs and Linhof 23 Polaroid backs only - NOTE! this camera does NOT accept Graphic-style(or Horseman/Mamiya RB) type backs FOCUSING SCREEN: Groundglass with grid-lines INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 2" (48mm) with wide-angle bellows and flat lensboard, 1.6" (40mm) with recessed lensboard MAXIMUM EXTENSION: 13.5" (340mm) with standard bellows LENSBOARD: Linhof Technika 45 Type 96x99mm FOLDED DIMENSIONS: 125 x 165 x 210mm (4.9 x 6.5 x 8.2") LWH WEIGHT: 6 lbs (2800g)

Technikardan 45 /4 x 5 inch/

TILTS: 360 degrees - front and rear tilts limited only by bellows, with reference scales +/- 10 degrees with a "zero" position click-stop SWINGS: 360 degrees - front and rear swings limited only by bellows, with reference scales +/- 10 degrees with a "zero" position click-stop RISE & FALL: Front: 50mm rise, 20mm fall, Rear: 50mm rise only LATERAL SHIFT: Front: 20mm right, 55mm left, Rear: 50mm right, 55mm left CAMERA BACK: 4x5 Vertical/Horizontal quickchange International Standard Graflock FOCUSING SCREEN: Groundglass with grid-lines INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 60mm (2.4") with wide-angle bellows, 50mm (2")with wide-angle bellows and recessed lensboard (for Copal/Compur #0 shutter only!) MAXIMUM EXTENSION: 19" (485mm) LENSBOARD: Linhof Technika 45 Type 96x99mm FOLDED DIMENSIONS: 5 x 8.5 x 10" (125 x 215 x 255mm) LWH WEIGHT: 6.6 lbs. (3000g)

Kardan E /4 x 5 inch/

TILTS: Front(axis): 30 degrees forward, 40 degrees backward, Rear(axis): 30 degrees forward, 40 degrees backward SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by bellows RISE & FALL: Front: 2.6" (65mm) rise; Rear: 2.6" (65mm) rise LATERAL SHIFT: Front: 2.4" (60mm) left, 3.2" (80mm) right, Rear:3.2" (80mm) left, 2.4" (60mm) right CAMERA BACK: 4x5" Vertical/Horizontal quickchange International Standard Graflock FOCUSING SCREEN: Groundglass with 1cm grid-lines and 9x12cm scoring - #021805 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 100mm (4") with standard bellows and flat lensboard, 80mm (3.2") with wide-angle bellows and flat lensboard, 60mm (2.4") with wide-angle bellows and recessed lensboard MAXIMUM EXTENSION: 14.5" (365mm) MONORAIL LENGTH: 18" (450mm) LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 450 x 240 x 355mm (18 x 9.5 X 14") LWH WEIGHT: 8.6 lbs (3.9kg)

Kardan GT /4 x 5 inch/

TILTS: Front(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt, Rear(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by bellows RISE & FALL: Front: 2.2" (56mm) rise, 1" (25mm) fall, Rear: 2.2" (56mm) rise, 1" (25mm) fall LATERAL SHIFT: Front: 2.4" (60mm) left, 3.2" (80mm) right, Rear:3.2" (80mm) left, 2.4" (60mm) right - as per calibrations CAMERA BACK: 4x5" Vertical/Horizontal quickchange International Standard Graflock FOCUSING SCREEN: Groundglass with 1cm grid-lines and 9x12cm scoring - #021805 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 100mm (4") with standard bellows and flat lensboard, 80mm (3.2") with wide-angle bellows and flat lensboard, 60mm (2.4") with wide-angle bellows and recessed lensboard (NOTE! to use a 47mm lens on this camera requires the recessed lensboard adapter #001093 which allows the use of an additional smaller Technika type recessed lensboard, which, when combined puts the minimum extension at about 52mm - Schneider's 47mm XL lens requires a 59mm minimum extension to focus to infinity. MAXIMUM EXTENSION: 20" (500mm) limited by included bellows MONORAIL LENGTH: Telescopes from 15-23" (380-585mm) LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 15 x 9.5 x 14" (380 x 240 x 355mm) L.W.H. WEIGHT: 9.7 lbs. (4.4kg)

Kardan GTL /4 x 5 inch/

TILTS: Front(axis): 360 degrees, Rear(axis): 360 degrees - limited only by the bellows + 40 degrees forward/40 degrees backward base tilt SWINGS: Front(calibrated): 50 degrees left, 50 degrees right, Rear(calibrated): 50 degrees left, 50 degrees right - This camera is capable of 360 degrees of swing RISE & FALL: LATERAL SHIFT: Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with 1cm grid-lines and 9x12cm scoring - #021805 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3" (7.5cm) with wide-angle bellows MAXIMUM EXTENSION: 22.6" (575mm) MONORAIL LENGTH: Telescopes from 18-25" LENSBOARD: Linhof Kardan Type 162x162mm FOLDED DIMENSIONS: 17.7 x 11.2 x 17.5" (450 x 285 x 445mm) WEIGHT: 18.25 lbs. (8.3kg)

Kardan Master GTL AMS /4 x 5 inch/

TILTS: Front(axis): 360 degrees, Rear(axis): 360 degrees - limited only by the bellows + 40 degrees forward/40 degrees backward base tilt SWINGS: Front(calibrated): 50 degrees left, 50 degrees right, Rear(calibrated): 50 degrees left, 50 degrees right - This camera is capable of 360 degrees of swing RISE & FALL: Front: 130mm rise(70mm geared + 60mm manual), 70mm fall(50mm geared + 20mm manual), Rear(geared): 80mm rise, 46mm fall LATERAL SHIFT: Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with 1cm grid-lines, AMS calibrations and 9x12cm scoring - #021831 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3" (7.5cm) with wide-angle bellows MAXIMUM EXTENSION: 22.6" (575mm) MONORAIL LENGTH: Telescopes from 18-25" LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 17.7 x 11.2 x 17.5" (450 x 285 x 445mm) WEIGHT: 18.25 lbs. (8.3kg)

Kardan GT 5 x 7 inch

TILTS: Front(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt, Rear(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by bellows RISE & FALL: Front: 1" (27mm) rise, 2.2" (55mm) fall, Rear: 3.1" (80mm) rise, 1.1" (30mm) fall LATERAL SHIFT: Front: 2.4" (60mm) left, 3.2" (80mm) right, Rear:3.2" (80mm) left, 2.4" (60mm) right - as per calibrations CAMERA BACK: 5x7" Vertical/Horizontal quickchange International Standard FOCUSING SCREEN: Groundglass with 1cm grid-lines - #021802 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 80mm (3.2") with wide-angle bellows and flat lensboard, 60mm (2.4") with wide-angle bellows and recessed lensboard MAXIMUM EXTENSION: 18.5" (470mm) limited by included bellows MONORAIL LENGTH: Telescopes from 15-23" (380-585mm) LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 15 x 13 x 17.5" (380 x 340 x 440mm) L.W.H. WEIGHT: 13.3 lbs. (5.1kg)

Kardan Master GTL AMS 5 x 7 inch

TILTS: Front(axis): 360 degrees, Rear(axis): 360 degrees - limited only by the bellows + 40 degrees forward/40 degrees backward base tilt SWINGS: Front(calibrated): 50 degrees left, 50 degrees right, Rear(calibrated): 50 degrees left, 50 degrees right - This camera is capable of 360 degrees of swing RISE & FALL: Front: 130mm rise(70mm geared + 60mm manual), 70mm fall(50mm geared + 20mm manual), Rear(geared): 80mm rise, 46mm fall LATERAL SHIFT: Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK: 5x7" Vertical/Horizontal quick-change International Standard FOCUSING SCREEN: Groundglass with 1cm grid-lines, AMS calibrations and 9x12cm scoring - #021830 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: MAXIMUM EXTENSION: 21.5" (550mm) - limited by supplied rail MONORAIL LENGTH: Telescopes from 18-25" LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 17.7 x 11.2 x 17.5" (450 x 285 x 445mm)

Kardan GT 8 x 10 inch

TILTS: Front(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt, Rear(axis): 30 degrees forward + 40 degrees base tilt, 40 degrees backward + 40 degrees base tilt SWINGS: Front: 360 degrees, Rear: 360 degrees - limited only by bellows RISE & FALL: Front: 3.1" (80mm) fall only, Rear: 2.4" (65mm) rise only - rise/fall is extendable with accessory extensions or by tilting the monorail and returning the standards to vertical using the base tilts LATERAL SHIFT: Front: 2.4" (60mm) left, 3.2" (80mm) right, Rear:3.2" (80mm) left, 2.4" (60mm) right - as per calibrations CAMERA BACK: 8x10" Vertical/Horizontal quickchange International Standard FOCUSING SCREEN: Groundglass with 1cm grid-lines - #021816 INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.5" (90m) with wide-angle bellows MAXIMUM EXTENSION: 29.5" (750mm) limited by included bellows MONORAIL LENGTH: Telescoping type - 23.5-32" (600-800mm) LENSBOARD: Linhof Kardan Type 162x162mm DIMENSIONS: 22.5 x 17 x 19.5" (570 x 435 x 495mm) L.W.H. WEIGHT: 16.5 lbs. (7.5kg)

Kardan GTL /8 x 10 inch/

TILTS: Front(axis): 360 degrees, Rear(axis): 360 degrees - limited only by the bellows + 40 degrees forward/40 degrees backward base tilt SWINGS: Front(calibrated): 50 degrees left, 50 degrees right, Rear(calibrated): 50 degrees left, 50 degrees right - This camera is capable of 360 degrees of swing RISE & FALL: Front: 130mm rise(70mm geared + 60mm manual), 70mm fall(50mm geared + 20mm manual), Rear(geared): 55mm rise, 55mm fall LATERAL SHIFT: Front: 2" (50mm) left, 2" (50mm) right, Rear: 2" (50mm) left, 2" (50mm) right CAMERA BACK: 8x10" Vertical/Horizontal Internatonal Standard type FOCUSING SCREEN: Groundglass with grid-lines INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.5" (9cm) with wide-angle bellows MAXIMUM EXTENSION: 34" (870mm) MONORAIL LENGTH: Telescopes from 25-35" (630-900mm) LENSBOARD: Linhof Kardan Type 162x162mm Flat or Recessed DIMENSIONS: 24.8 x 16.7 x 24" (630 x 425 x 610mm) WEIGHT: 28.75lbs (13kg)

Sinar

X 4 x 5 inch

TILTS: Front: (asymmetric, geared)19 degrees forward, 19 degrees backward + (base)45 degrees forward, 45 degrees backward, Rear: (asymmetric, geared)19 degrees forward, 19 degrees backward + (base)45 degrees forward, 45 degrees backward SWINGS: Front(geared): 50 degrees right, 50 degrees left, Rear(geared): 50 degrees right, 50 degrees left RISE & FALL: Front(geared): 40mm rise, 40mm fall, Rear(geared): 40mm rise, 40mm fall LATERAL SHIFT: Front(geared): 30mm left, 50mm right, Rear(geared): 30mm left, 50mm right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Grafloc FOCUSING SCREEN: Groundglass with 1cm grid-lines and calibration lines for asymmetric movements INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 83mm (3.6") with standard bellows, 63mm (2.3") with wide-angle bellows, 32mm (1.3")with wide angle bellows and recessed lensboard #241052 MAXIMUM EXTENSION: 10.5" (265mm) as equipped - 18" (457mm) possible with standard bellows and optional extension rail MONORAIL LENGTH: 12" (30.5cm) LENSBOARD: 139x139mm Sinar lensboard DIMENSIONS: 12 x 10 x 16" (305 x 250 x 405mm) incl. rail clamp WEIGHT: 13 lbs. (5.9kg)

F1 4 x 5 inch

TILTS: Front(base): 50 degrees forward, 90 degrees backward, Rear(base): 90 degrees forward, 50 degrees backward SWINGS: Front: 50 degrees left, 50 degrees right, Rear: 50 degrees left, 50 degrees right RISE & FALL: Front: 4.4"(112mm) rise, Rear: 4.4"(112mm) rise LATERAL SHIFT: Front: 24mm right, 67mm left, Rear: 21mm right, 61mm left CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock. FOCUSING SCREEN: Groundglass with 1cm grid-lines and calibration lines for asymmetric movements INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 83mm (3.6") with standard bellows, 60mm (2.2") with wide-angle bellows, 30mm (1.2")with wide angle bellows and recessed lensboard #241052 MAXIMUM EXTENSION: 9.75" (240mm) as equipped - 18" (45.7cm) possible with standard bellows and optional extension rail MONORAIL LENGTH: 12" (30.5cm) LENSBOARD: 139x139mm Sinar lensboard DIMENSIONS: 12.5 x 7.5 x 15" (318 x 198 x 380mm) incl. rail clamp (LWH) WEIGHT: 7 lbs. (3.2 kg)

F2 4 x 5 inch

TILTS: Front(base): 50 degrees forward, 90 degrees backward, Rear(base): 90 degrees forward, 50 degrees backward SWINGS: Front: 50 degrees left, 50 degrees right, Rear: 50 degrees left, 50 degrees right RISE & FALL: Front: 4.4"(112mm), Rear: 4.4"(112mm) LATERAL SHIFT: Front: 24mm right, 67mm left, Rear: 21mm right, 61mm left CAMERA BACK: 4x5"Vertical/Horizontal quick-change International Standard Graflock. FOCUSING SCREEN: Groundglass with 1cm grid-lines and calibration lines for asymmetric movements INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 83mm (3.6") with standard bellows, 60mm (2.2") with wide-angle bellows, 30mm (1.2")with wide angle bellows and recessed lensboard #241052 MAXIMUM EXTENSION: 10.5" (265mm) as equipped - 18" (457mm) possible with standard bellows and optional extension rail MONORAIL LENGTH: 12" (30.5cm) LENSBOARD: 139x139mm Sinar lensboard DIMENSIONS: 12.5 x 7.5 x 15" (318 x 198 x 380mm) incl. rail clamp (LWH) WEIGHT: 8 lbs. (3.6 kg)

P2 4 x 5 inch

TILTS: Front: (asymmetric, geared)19 degrees forward, 19 degrees backward + (base)45 degrees forward, 45 degrees backward, Rear: (asymmetric, geared))19 degrees forward, 19 degrees backward + (base)45 degrees forward, 45 degrees backward SWINGS: Front(geared): 50 degrees right, 50 degrees left, Rear(geared): 50 degrees right, 50 degrees left RISE & FALL: Front(geared): 40mm rise, 40mm fall, Rear(geared): 40mm rise, 40mm fall LATERAL SHIFT: Front(geared): 30mm left, 50mm right, Rear(geared): 30mm left, 50mm right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock compatible with film-plane metering probes FOCUSING SCREEN: Groundglass with 1cm grid-lines and calibration lines for asymmetric movements INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 85mm (3.7") with standard bellows, 65mm (2.4") with wide-angle bellows, 34mm (1.4")with wide angle bellows and recessed lensboard #241052 MAXIMUM EXTENSION: 18" (455mm) possible with standard bellows and 6" extension rail - 36" (912mm) possible with (2) bellows, multi-purpose standard and both extension rails MONORAIL LENGTH: 38"(912mm) - 12" (305mm) base rail + 6"(152mm) and 18"(455mm) extensions LENSBOARD: 139x139mm Sinar lensboard DIMENSIONS: 12 x 10 x 16" (305 x 250 x 405mm) incl. rail clamp (LWH) WEIGHT: 13 lbs. (5.9kg) - camera only

P2 8 x 10 inch

TILTS: Front: (asymmetric, geared)19 degrees forward, 19 degrees backward + (base)45 degrees forward, 45 degrees backward, Rear: (asymmetric, geared))19 degrees forward, 19 degrees backward + (base)20 degrees forward, 20 degrees backward SWINGS: Front(geared): 50 degrees right, 50 degrees left, Rear(geared): 50 degrees right, 50 degrees left RISE & FALL: Front(geared): 40mm rise, 40mm fall, Rear(geared): 50mm rise LATERAL SHIFT: Front(geared): 30mm left, 50mm right, Rear(geared): 60mm left, 20mm right CAMERA BACK: 8x10" Vertical/Horizontal quick-change International Standard compatible with Sinar film-plane metering probes FOCUSING SCREEN: Groundglass with 1cm grid-lines and calibration lines for asymmetric movements and image size markings INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 2" (51mm) MAXIMUM EXTENSION: 10.5" (265mm) as equipped - 28" (710mm) possible with standard bellows and optional extension rail MONORAIL LENGTH: 12" (305mm) LENSBOARD: 139x139mm Sinar lensboard DIMENSIONS: 12 x x " (305 x x mm) incl. rail clamp (LWH) WEIGHT: 18 lbs

Toyo

45 C 4 x 5 inch

TILTS: Front(axis): 48 degrees forward, 48 degrees backward, Rear(axis): 48 degrees forward, 48 degrees backward SWINGS: Front(calibrated): 45 degrees left, 45 degrees right, Rear(calibrated): 45 degrees left, 45 degrees right - both standards are capable of 360 degrees rotation - limited only by the bellows RISE & FALL: Front: 4.7" (120mm) rise, Rear: 4.7" (120mm) rise LATERAL SHIFT: Front: 1.8" (45mm) left, 1.8" (45mm) right, Rear: 1.8" (45mm) left, 1.8" (45mm) right CAMERA BACK: 4x5" Revolving International Standard Graflock - NOTE: Toyo revolving backs can be used in any position FOCUSING SCREEN: Groundglass with 1cm black grid-lines, 6x7 and 6x9cm markings INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.6" (90mm) with standard bellows and flat lensboard, 2" (50mm) with wide-angle bellows and recessed lensboard MAXIMUM EXTENSION: 17.7" (449mm) MONORAIL LENGTH: 17.7" (450mm) LENSBOARD: Toyo 158x158mm DIMENSIONS: 19 x 11 x 14" (474 x 274 x 352mm) LWH WEIGHT: 9 lbs. (4kg)

45 GX /4 x 5 inch/

TILTS: Front(axis): 45 degrees forward + 45 degrees base tilt, 35 degrees backward + 45 degrees base tilt, Rear(axis): 45 degrees forward + 45 degrees base tilt, 35 degrees backward + 45 degrees base tilt SWINGS: Front: 30 degrees left, 30 degrees right, Rear: 30 degrees left, 30 degrees right RISE & FALL: Front: 5.7" (145mm) rise, Rear: 5.7" (145mm) rise LATERAL SHIFT: Front: 1.2" (35mm) left, 1.2" (35mm) right, Rear: 1.2" (35mm) left, 1.2" (35mm) right CAMERA BACK: 4x5" Revolving International Standard Graflock - NOTE: Toyo revolving backs can be used in any position FOCUSING SCREEN: Groundglass with 1cm grid-lines, 6x7 and 6x9cm markings and fresnel INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.8" (95mm) with wide angle bellows, 2.2" (55mm) with Recessed Board MAXIMUM EXTENSION: 19" (485mm) MONORAIL LENGTH: 20" - 10" (250mm) basic rail + 10" (250mm) extension rail LENSBOARD: Toyo 158 x 158mm DIMENSIONS: 10.5 x 15.6 x 11" (266 x 397 x 291mm) LWH WEIGHT: 14.1 lbs.(6.4kg)

45 GII /4 x 5 inch/

TILTS: Front(axis): 45 degrees forward, 35 degrees backward, Rear(axis): 45 degrees forward, 35 degrees backward SWINGS: Front: 30 degrees left, 30 degrees right, Rear: 30 degrees left, 30 degrees right RISE & FALL: Front(geared): 5.7" (145mm) rise, Rear(geared): 5.7" (145mm) rise LATERAL SHIFT: Front(geared): 1.2" (35mm) left, 1.2" (35mm) right, Rear(geared): 1.2" (35mm) left, 1.2" (35mm) right CAMERA BACK: 4x5" Revolving International Standard Graflock - NOTE: Toyo revolving backs can be used in any position FOCUSING SCREEN: Groundglass with 1cm grid-lines, 6x7 and 6x9cm markings and fresnel INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 110mm (4.4") with standard bellows and flat lensboard, 3.4" (85mm) with wide angle bellows and flat lensboard, 2" (50mm) with wide-angle bellows and recessed lensboard MAXIMUM EXTENSION: 19" (485mm) with extension rail MONORAIL LENGTH: 20" - 10" (250mm) basic rail + 10" (250mm) extension rail LENSBOARD: Toyo 158x158mm Flat or Recessed Board, or misc Lensboard Adapters DIMENSIONS: 10.5 x 13 x 11" (266 x 340 x 291mm) LWH WEIGHT: 12.1 lbs (5.5kg)

VX 125 /4 x 5 inch/

BASE TILTS: Front: 25 degrees forward, 25 degrees backward, Rear: 25 degrees forward, 25 degrees backward SWINGS: Front: 25 degrees left, 25 degrees right, Rear: 25 degrees left, 25 degrees right RISE & FALL: Front(geared): 70mm rise , Rear(geared): 70mm rise LATERAL SHIFT: Front(geared): 30mm left, 40mm right, Rear(geared): 30mm left, 40mm right CAMERA BACK: 360 degree rotating 4x5 International Standard Graflock type FOCUSING SCREEN: Groundglass with 1cm grid-lines, 6x7 and 6x9cm markings and fresnel INTERCHANGEABLE BELLOWS: YES MINIMUM EXTENSION: 2.7" (67mm) with flat lensboard, 1.1" (27mm) with recessed lensboard MAXIMUM EXTENSION: 324mm using (2)included 30mm VX extension caps and flat lens board, or 19" (485mm) with optional GX basic rail, 250mm extension rail, tripod mounting block and 4x5 standard bellows MONORAIL LENGTH: VX Telescoping 125-250mm Monorail LENSBOARD: Standard Toyo 158x158mm, flat, recessed and adapter boards available FOLDED DIMENSIONS: 12 x 9 x 5" (305 x 225 x 126mm) WEIGHT: 5.5 lbs (2.55kg)

VX 125 R /4 x 5 inch/

BASE TILTS: Front: 25 degrees forward, 25 degrees backward, Rear: 25 degrees forward, 25 degrees backward SWINGS: Front: 25 degrees left, 25 degrees right, Rear: 25 degrees left, 25 degrees right RISE & FALL: Front(rise): 70mm , Rear(rise): 70mm LATERAL SHIFT: Front(geared): 30mm left, 40mm right, Rear(geared): 30mm left, 40mm right CAMERA BACK: 360 degree rotating 4x5 International Standard Graflock type FOCUSING SCREEN: Groundglass with 1cm grid-lines, 6x7 and 6x9cm markings and fresnel INTERCHANGEABLE BELLOWS: YES MINIMUM EXTENSION: 4" (100mm) with flat lensboard(70mm if tripod mount is moved ahead of front standard or behind rear standard), 2.2" (60mm) with recessed lensboard(30mm with recessed lensboard if tripod mount is moved ahead of front standard or behind rear standard) MAXIMUM EXTENSION: 5.5" (136mm) - extendable to 267mm with optional GX extension rail, or 19" (485mm) with both optional 150mm and 250mm GX extension rails and optional Toyo 4x5 standard bellows MONORAIL LENGTH: 125mm - compatible with G/GX extensions and tripod mounting blocks LENSBOARD: Standard Toyo 158x158mm FOLDED DIMENSIONS: 12" x 9" x 5" (305 x 225 x 126mm) WEIGHT: 5.5 lbs (2.55kg)

45 CX /5 x 7 inch/

TILTS: Front(axis): 45 degrees forward, 45 degrees backward, Rear(axis): 45 degrees forward, 45 degrees backward SWINGS: Front: 30 degrees left, 30 degrees right, Rear: 30 degrees left, 30 degrees right - (no calibrations) RISE & FALL: Front: 80mm rise, Rear: 80mm rise LATERAL SHIFT: Front: 1.2" (30mm) left, 1.2" (30mm) right, Rear: 1.8" (45mm) left, 1.8" (45mm) right CAMERA BACK: 4x5" Vertical/Horizontal quick-change International Standard Graflock FOCUSING SCREEN: Groundglass with 1cm grid-lines, 6x7 and 6x9cm markings INTERCHANGEABLE BELLOWS: Yes - optional wide angle bellows #180694 is specific to the CX only MINIMUM EXTENSION: 80mm - 67.5mm with recessed lensboard MAXIMUM EXTENSION: 17.4" (435mm) MONORAIL LENGTH: 17.7" (450mm) LENSBOARD: Toyo 110x110mm (same as the Toyo 4x5 Field series A2 and AX) DIMENSIONS: 18.8 x 10.9 x 12.6" (478 x 277 x 322mm) LWH WEIGHT: 7.9 lbs (3.6kg)

810 GII /8 x 10 inch/

TILTS: Front(axis): 45 degrees forward, 35 degrees backward, Rear(axis): 50 degrees forward, 50 degrees backward SWINGS: Front: 30 degrees left, 30 degrees right, Rear: 30 degrees left, 30 degrees right RISE & FALL: Front(geared): 3.2" (85mm) rise, 2.2" (60mm) fall, Rear(geared): 6.7" (170mm) rise LATERAL SHIFT: Front(geared): 1.4"(35mm) left, 1.4"(35mm)right, Rear(geared): 2.35" (60mm) left, 2.35"(60mm) right CAMERA BACK: 8x10" Vertical/Horizontal quick-change type International Standard Back FOCUSING SCREEN: Groundglass with acid etched grid-lines INTERCHANGEABLE BELLOWS: Yes MINIMUM EXTENSION: 3.3" (85mm) with Standard Board, 1.8" (45mm) with Recessed Board MAXIMUM EXTENSION: 19.7" (500mm) MONORAIL LENGTH: 9.8"(250mm) basic monorail + 9.8"(250mm) extension rail(included) LENSBOARD: Toyo 158 x 158mm FOLDED DIMENSIONS: 11.5 x 18.5 x 16.8" (291 x 471 x 427mm) WEIGHT: 19.6 lbs. (8.9kg)

Wista

M 450 /4 x 5 inch/

    Slovnik pojmu

    Tilts : sklon prednich a zadnich standard
        forward : dopredu
        backward : dozadu
        drop bed : snizeni

    Swings : natoceni standardy
        left : doleva
        right : doprava
        front : predni
        rear : zadni

    Rise : paralelni zvednuti predni standardy (desticky s objektivem)

    Fall : paralelni snizeni predni standardy (desticky s objektivem)

    Lateral Shift : posunuti predni standardy doleva nebo doprava

    Camera Back : ram pro uchyceni kazety na svitkovy nebo na plochy film

    Focusing Screen : zaostrovaci matnice

    Minimum Extension : minimalni vysunuti kamery

    Maximum Extension : maximalni vysunuti kamery

    Monorail Length : delka kolejnice u studiove kamery

    Lensboard : objektivova desticka - druh

    Folded Dimensions : rozmery uzavrene kamery

    Weight : hmotnost kamery bez objektivu